Product Description:
HMAS-C1000SZD hardness measurement system is a new high-performance hardness measurement system, which is a new generation of hardness tester newly developed on the traditional micro-hardness measurement function.The machine has good reliability, operability and intuitive, is the use of precision mechanical technology, optoelectronic technology, and material hardness measurement software is a new Vickers and Knoop hardness testing equipment.This machine is equipped with automatic movement control system: automatic x-y working platform, can be set position, distance, automatic mobile platform, can be freedom of movement within the range of control mode, not only realized the convenience of operation, as well as precision measurements (such as the thickness of coatings, metallographic analysis and hardness of ladder, etc.) and metal structure analysis provides a more accurate analysis method.
HMAS-C1000SZD hardness measurement system is suitable for the determination of micro, thin specimens, surface coating and other specimens of the microhardness and determination of glass, ceramics, agate, precious stones and other brittle materials, microhardness, is a research institutes, factories and quality Monitoring departments for material research and testing of the ideal hardness test equipment.
Performance characteristics:
1. The instrument is equipped with a high precision CCD image imaging system, which can be used to transfer the image of the inside of the instrument to the computer software center.
2.the instrument through the computer control system, the machine can be done on the computer through the mouse very convenient for real-time control of hardness tester, can implement all the hardness tester related functions, and the effect is the same as the direct durometer panel.
3.The machine is equipped with automatic movement control system: automatic x-y table, can be controlled within the range freedom of movement, not only realized the convenience of operation, as well as precision measurements (such as the thickness of coatings, metallographic analysis and hardness gradient, etc.) and metal structure analysis provides a more accurate analysis method.
4. The machine has single point suppression and continuous suppression function (can be set to suppress the counting machine automatically continuously suppress).
Technical parameters:
1. Turret mode: automatic turret
2. Variable load device structure: precision gear structure
3. Lifting rod: precision trapezoidal screw
4. Test force:
(level 8) N:0.098 N, 0.245 N, 0.490 N, 0.981 N, 1.961 N, 2.942 N, 4.903 N, 9.807N
(8 levels) gf: 10gf, 25gf, 50gf, 100gf, 200gf, 300gf, 500gf, 1000gf
(level 8) scale: HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1
5. Test force loading: apply the test force speed: 0.05mm/s, fully automatic (with unloading/keeping/unloading)
6. Meet the standard (accuracy) : GB/T4340 national standard
7. X-Y mobile platform: automatic motion control system
8. Platform movement speed: 3 speed adjustable speed (speed 1, speed 5, speed 10)
9. Mouse click function: click which platform to go
10. The brightness of the light source can be adjusted
11. Theoretical hardness measurement range: 0.001-9999HV
12. Hardness value display mode: computer image analysis and measurement
13. Objective magnification: 10X (observation), 40X (measurement)
14. Measurement data acquisition mode: computer collection
15. Measurement data calculation method: computer automatic calculation and analysis
16. Test force selection: external selection force knob (automatic switching)
17. Test time: 0 ~ 999 seconds, minimum change of 1 second
18. MAX height: 50mm
19. Indenter center to inner wall distance: 110 mm
20. Dimensions: 460X230X490mm
21. Power: 220V