MIC10 ultrasonic hardness tester.

Measurement/conversion range :20 ~ 1740HV, 48 ~ 105HRB, 20 ~ 68HRC, 76 ~ 618HB, 5 ~ 2250N/mm2(10Kg probe)

Display :4 LCD band switch backlight.

Resolution: 1HV; 1 hb;

Data memory: the data recorder can store 1500 measurements, and the memory card can store 590 data (MIC10DL).

Interface: RS232 interface.

Power supply: 2 1.5V battery.

Dimension weight: 160x70x45mm,300g.

MIC20 composite ultrasonic hardness tester.

MIC20 composite hardness tester (ultrasonic/Richter hardness tester) combines UCI method (ultrasonic contact impedance method) and springback hardness detection method. The UCI method can be used to detect materials with complex shapes, and the springback method is used to detect large coarse grain forgings and castings. After applying the test load, the UCI method determines the hardness of the material by measuring the indentation size of vickers diamond in the back of the material.

TIV portable optical hardness tester.

Probe:

TIV105 probe, load 5kgf(50N)

TIV101 probe, load 1kg(10N)

Measuring range:

100HV ~ 1000HV(with TIV105 probe)

30HV ~ 500HV(with TIV101 probe)

Display :VGA color TFT display.

Operating language: German, English, French.

TKM-459 ultrasonic hardness tester.

Load: 50N (standard probe)

Measurement range: hv240-940, hrc20-70, hb100-450.

Measurement accuracy: HV:3%, HRC: 1.5%, HB:4%.

Measurement display: backlight liquid crystal display.

Storage: can store 6000 measurements.

Correction value: 35.

Measurement direction: free measurement in the whole direction.

Hardness: bushi, lowe, and vickers conversion.

DynaMIC rebound hardness monitor.

DynaMIC can automatically compensate with a different hardness value change detection direction of special signal processing technology, manipulation, according to the rebound hardness test instrumentation (according to ASTM A956 and DIN50156 standardization). Put the impact device in place, and then read the hardness value -- that's the hardness test for a few seconds.

DynaPOCKET dynamic rebound hardness tester.

DynaPOCKET is a small integrated digital hardness tester (based on ASTM A956 and DIN 50156) based on dynamic rebound method. Lightweight design allows for easy on-site hardness testing of entities, non-mobile parts, and even other hard to reach locations.