Product Description:
LX-A / D rubber hardness meter is widely used in the hardness test of medium and low hardness plastic, all kinds of rubber, poly-fat, leather, wax and so on, and it can optional HLX-A / C fixed-load supporting. Meet the standards: DIN 53505, ASTM D2240 ISO / R868, JIS R7215; Executive Standard: GB / T531-99, GB2411-80, HG / T2489-93, JJG304-2003.
LX-C type microporous material hardness tester is for compression rate was 50%, the stress of 0.5 kg/S square meters containing foamed economy made of rubber and plastic microporous material hardness measurement, can also be used to other similar hardness materials. The product meets the requirements of HG/T2489 and other related standards. The use of HLX-D fixed support bracket is optional.
Technical parameters:
              LX-A              LX-B                 LX-C
1. Scale value: 0-100HA 
2. Measurement error: 20HA~90HA, HA≤±1HA
3. Pressure needle stroke: 0-2.5mm
4. The end of the pressure needle value: （A）0.55N-8.06N
5. Pressure needle size: Φ0.79mm
LX-D
1. Scale value: 0-100HD
2. Measurement error: 20HD~90HD, HD≤±1HD
3. Pressure needle stroke: 0-2.5mm
4. The end of the pressure needle value: （D）0-44.5N
5. Pressure needle size: SR0.1mm
LX-C
1. Scale value: 0-100HW
2. Measurement error: 20HW~90HW, HC≤±1HW
3. Pressure needle stroke: 0-2.5mm
4. The end of the pressure needle value: （C）0.55N-8.06N