Product Description:
Heat inlaying equipment is used to ensure a good sample by water cooling and hydraulic pressure.The selection of various mold shapes can be convenient for customers to mosaic a various of diameters of the sample or even rectangles. Inlaying two samples at one time can be realized by heel block. The innovative sliding lid design ensures the convenience of each opening and closing of the mold.
20170318480YR Hydraulic heat inlaying machine is an all-hydraulic, water-cooled and hot paneling prototype,water cooling and heat inlay machine,can be used for pre-polishing installation operations.The unit can automatically perform the corresponding operation in sequence.Automatic sliding seal can quickly and easily open/close the inlaid sample barrels components, and inlaid sample barrels componentscan be quickly replaced without tools.
The rugged aluminum construction uses a powder coating.With its solid structure and hydraulic system, the machine's work noise can be minimized.The best inlay operation is achieved by a comprehensive selection of the mounting cartridge assembly from 25.2-40mm, rectangular 30x60/40x60mm and the different pressure modes. Inlaying two samples at one time can be realized by heel block.
       In addition to being sold as a separate machine, it can be provided as a vertical unit. Comfortable working height can be achieved by integrating thermal camera into system furniture. As a selection, the system heat and inlay equipment can be equipped with closed cooling circulatory system, thus no longer depends on the external tap water supply, also reduce the water consumption to a fixed amount (6 litres). System heat inlay equipment can provide two or three units, and aluminum base powder coating appearance and system laboratory perfect collocation.
Advantages:
1、Easy to use cover system
2、Automatic, electronic control
3、LCD large display screen and user-friendly interface
4、18 inlaid programs have stored
5、Four different compression modes for selection
6、Automatic water cooling (with water saving function)
7、Automatic hydraulic pressure mode
8、Two samples can be inlaid at the same time
9、Mold components are easy to replace
10、Strong aluminum shell design with a powder coating on the surface
11、The pressure inlaying system and suitable working height can be configured with closed water cooling system
Technical parameters:
1、Mold components：40 mm / 50 mm / 60 mm / 70 mm
rectangle 30 x 60 mm rectangle 40 x 60 mm
2、Closed system：closed system
3、Temperature range：20-200°C
4、Warm-up time：adjustable
5、Cooling time：adjustable
6、The MAX pressure is affected by the mold size：310bar
7、Power：3.1kVA
8、Heating power：4x630W
9、Dimension：390 x 450 x 500 mm
10、Net weight：68kg